inner view ( 2 : 1 ) dim. in mm r rr r drawn this drawing may not be copied or reproduced in any way, and may not be passed on to a third party without written permission. ownership and copyright of conec gmbh appd. title: dwg no: part no: name date d o n o t a l t e r c a d d r a w i n g b y h a n d 42k1a283 petker 16.12.10 16.12.10 khle male connector m8x1, solder cup, axial, solder connection see table index: c 10.08.11, k.h. ?4071 rated volltage and current rating updated d i r e c t i v e 2 0 0 2 / 9 5 / e c r o h s c o m p l i a n t 3 pos description: sal - 8 - rsc3-l cable- n : 4 - 5,5mm sal - 8 - rsc4-l 4 - 5,5mm part no: 42-00005 42-00007 pos: 34 width across flats 12 width across flats 13 max. external cable diameter see table n 13,7 n 14 4 3 1 technical specification: rated voltage: iec 61076-2-104 current rating: iec 61076-2-104 insulation resistance: iec 60512 pollution degree: iec 60664-1 degree of protection: iec 60529 temperature range: iec 60664-1 mating cycles: iec 60512-9a 3pos 4pos 60 v 30 v 3 a at 40c with 0,25mm2 >= 100 m 3/2 ip 67, in mated condition -30c ... +85c >= 100 materials: contact: contact plating: contact carrier: cable sealing: o-ring: coupling nut: housing: cuzn au over ni in mating area pa6 gf, ul 94 nbr silicone die cast, nickel plated pa6 gf, ul 94 1 min. n 4 7 ( r e f . ) 4 2 1 3 4 pos installation specification: recommended torque: conec installation tool: 0,4 nm torque wrench: 36-000200 insert across flats 13: 36-000220
|
